EASY OPERATION
AND LOW EMISSIONS
The Focus SBR is one of RSF’s most popular fireplace designs and is certified to the 2020 EPA emissions regulations. With RSF’s latest built-in technology, the Smart BurnRate system, the Focus SBR is easy to operate and incredibly efficient. It is EPA certified at 1.4 g/hr, 44% cleaner than EPA 2020 requirements. Everyone benefits from the air-infused easy light-up, followed by tons of heat, clean combustion, and beautiful lazy flames.
This fireplace is certified for use with 7″ ICC Model EXCEL chimney only.
THE RSF COMFORT ADVANTAGE
Comfort is our specialty. We customize heat distribution from a wood fireplace throughout the home, including the basement. When the household temperature is tailored for a family at minimal cost and maximum efficiency, we call that the RSF Comfort Advantage.
Note: the central heating option is not available for the Pearl 3600, the Focus 3600 or Focus ST.
Gallery
Focus SBR – Easy operation and low emissions
Available Options
Clean Face FO-F2 + FO-V2
The Clean Face Kit is required for clean-face installations (no louvers). It includes plates that cover the louver openings and an air duct that brings air from the home into the fireplace. Gravity vents are required with this option.
Gravity Vent Kit
The gravity vent kit uses natural convection to distribute the heat generated by the fireplace to the same floor and/or floors above the fireplace.
Gravity Vent Kit – Rectangular
The gravity vent kit uses natural convection to distribute the heat generated by the fireplace to the same floor and/or floors above the fireplace.
Internal Blower
The internal blower kit will increase the circulation of heated air in the room where the fireplace is installed.
Central Heat Blower Kit
The central heat blower kit enables the distribution of heat generated by the fireplace throughout many rooms and different floors using either dedicated ducts or the house central heating ducts.
Central Heating Tee
This Tee allows you to have two Gravity Vents (FO-V2) on your fireplace and still be able to install the Central Heat option (FO-FDHB6-1).
Heat Dump
The Heat Dump Kit contains all the parts necessary to circulate a moderate amount of heat from your fireplace to another room with a small fan.
Inline Fan
Where additional air flow and heat output are desired, the Inline Fan is to be used in combination with the Intake Duct option (FO-CID, when available) or the Clean Face option (when available).
Rock retainer kit – SBR
This rock retainer kit will allow you to finish your Focus320 fireplace with thin non-supporting facing such as tiles.
Masonry Chimney Adapter
This adapter will attach to the liner with 3 stainless steel rivets (provided) and to the EXCEL chimney with 3 screws (provided).
Door Gasket Replacement Kit ⅝’’
This kit (FO-GRK8) includes the gasket and high temperature sealant required to change the door gasket on your fireplace.
Compare all fireplaces and options
view heat distribution options
Documents and Specs
Focus SBR
Note: The installation manual should always be used for the precise planning and accurate installation of your fireplace.
| GENERAL SPECIFICATIONS | |
|---|---|
| Framing Dimensions | 45″ W X 44 1/4″ H X 24″ D |
| Shipping weight | 562 lb |
| Glass viewing size | 24 ¼” W x 13 ¼” H |
| Firebox Size | 2.6 cu ft
Based on overall firebox dimensions, EPA firebox volume per certification testing is 2.1 cu ft. |
| Firewood Length | EPA tested with 14″ logs; can accept up to 22″ logs |
| Chimney | 7″ Excel |
| Door Finish | Black |
| Outside Air | 4″, meets R2000 |
| Mobile Home Approved | YES |
| PERFORMANCE | |
|---|---|
| EPA Certification | EPA 2020 certified at 1.4g/hr |
| BTU Output | 22,563 BTU/h Based on EPA certification testing using crib wood and calculations from CSA B415.1-10 |
| BTU Maximum | 50,000 BTU/h Based on engineering calculations using firebox volume, efficiency, loading density (12lb/cu ft for hardwood), average humidity, reloading interval, type of installation, etc. |
| Heating Capacity | 1,000 to 2,000 ft2 |
| Burn Technology | Smart BurnRate system (non-catalytic) |
| Optimal Efficiency | 75% Low Heating Value (LHV) using CSA B415.1-10 calculations. |
| EPA Average Efficiency | 66% High Heating Value (HHV) using CSA B415.1-10 calculations. |
| EPA Average CO | 1.5g/min Carbon monoxide (CO), using data from EPA crib wood testing |
| CATALOGS AND BROCHURES |
|---|
| Owner’s Manuals – Fireplaces |
|---|
| Warranty |
|---|
| U.S. EPA Certificate |
|---|
| U.S. EPA TEST REPORT |
|---|
